86-0731-89578196 [email protected]

Antimony Sulfide Sputtering Targets (Sb2S3)

Antimony Sulfide Sputtering Targets (Sb2S3)
Material Type Antimony Sulfide
Symbol Sb2S3
Color/Appearance Grey, Crystalline Solid
Melting Point (°C) 550
Relative Density (g/cc) 4.12
Water Solubility Reacts
Sputter RF, RF-R, DC
Type of Bond Indium, Elastomer


Antimony trisulfide Sb2S3 is found in nature as the crystalline mineral stibnite and the amorphous red mineral metastibnite. It is manufactured for use in safety matches, military ammunition, explosives and fireworks. It also is used in the production of ruby-colored glass and in plastics as a flame retardant. Historically the stibnite form was used as a grey pigment in paintings produced in the 16th century. It is a semiconductor with a direct band gap of 1.8-2.5 eV. With suitable doping, P and N type materials can be produced.

Material Notes

Antimony Trisulfide Sputtering Target, Purity is 99.99%; Circular: Diameter <= 14inch, Thickness >= 1mm; Block: Length <= 32inch, Width <= 12inch, Thickness >= 1mm.


Other Information of  Antimony Sulfide Sputtering Targets

  PVD and CVD display
• Semiconductor

• Optical

• High purity
• Custom Sizes Available

Manufacturing Process
• Manufacturing - Cold pressed - Sintered, Elastomer bonded to backing plate

• Cleaning and final packaging, Cleaned for use in vacuum,
Protection from environmental contaminants
Protection during shipment

• 99.9% Minimum Purity

• Discs, Plates, Column shape, Custom-made Available


Click for a downloadable datasheet on the Antimony Sulfide Sputtering Targets (Sb2S3)
Can't find the downloadable datasheet you need? Click here to send email to get it.
Click here for answers to some of the most common questions we get asked.