Understanding Crucibles: What Materials Are Used to Make Them?
Date: 2023-02-24
Keywords: Understanding,Crucibles,What,Materials,Are,Used,Make,Them,
Abstract: What are crucibles made of? Check this article to know everything about crucibles - from what they're made of to where to buy them and how to care for them.
How to Choose Backing Plates for Sputtering Targets?
Date: 2022-09-30
Keywords: How,Choose,Backing,Plates,for,Sputtering,Targets,When,you,
Abstract: Are you looking for backing plates for sputtering targets? Check the tips that will help you choose the correct backing plate for your needs.
Molybdenum Carbide Sputtering Targets (Mo2C) Video
Date: 2022-09-29
Keywords: Molybdenum Carbide Sputtering Targets (Mo2C)
Abstract: Molybdenum Carbide Sputtering Targets (Mo2C),Brand: AEM Deposition,Purity: 99.5%,Size: Ф2"x 0.125" Thick
Yttria-stabilized Zirconia Sputtering Target (YSZ) Video
Date: 2022-09-29
Keywords: Yttria-stabilized Zirconia Sputtering Target (YSZ)
Abstract: Yttria-stabilized Zirconia Sputtering Target (YSZ),Brand: AEM Deposition,Purity: 99.99%,Size: Ф3"x 0.125" Thick
AZO Sputtering Targets (Zinc Oxide with Alumina) Video
Date: 2021-09-01
Keywords: AZO,Sputtering,Targets,Zinc,Oxide,with,Alumina,Video,AZO,
Abstract: AZO Sputtering Targets (Zinc Oxide with Alumina),Brand: AEM Deposition,Composition: ZnO/Al2O3 98/2 wt%,Purity: 99.99%,Size: Ф4"x 5.0 mm Thick
Preparation of Ultrafine Metal Powder by Air Flow Milling
Date: 2021-09-29
Keywords: Preparation,Ultrafine,Metal,Powder,Air,Flow,Milling,
Abstract: Ultrafine metal powder can be prepared by mechanical method and physical methods. Today, check the preparation method of ultra-fine metal powder.
Preparation of Ultrafine Metal Powder by Ball Milling
Date: 2021-09-29
Keywords: Preparation,Ultrafine,Metal,Powder,Ball,Milling,Superfine,
Abstract: Ultrafine metal powder materials can be widely used in aerospace, ship, automobile, metallurgy, chemical industry, and other fields.
Process Flow of Metal Powder Injection Molding
Date: 2021-09-29
Keywords: Process,Flow,Metal,Powder,Injection,Molding,Metal,injection,
Abstract: Metal injection molding (MIM) is a kind of molding method in which the plasticized mixture of metal powder and its binder is injected into the mold.
Metal Powder Injection Molding (PIM) is Suitable for Which Type of Industries?
Date: 2021-09-29
Keywords: What,Industries,Metal,Powder,Injection,Molding,PIM,Suitable,
Abstract: The application of metal powder injection molding in the industry can be divided into two categories: civil and military.
Development Trend of Sputtering Target Industry
Date: 2021-09-29
Keywords: Development,Trend,Sputtering,Target,Industry,Sputtering,
Abstract: Sputtering target materials have shown a rapid growth momentum in the international and domestic markets, and the era of scale application and industrialization has come.
What is PVD Coating?
Date: 2022-12-16
Keywords: what is pvd coating
Abstract: What is PVD Coating? Physical vapor deposition (PVD) is a process in which a solid material is deposited onto a substrate to form a thin film.
What is Thin Film Deposition?
Date: 2022-12-16
Keywords: thin film deposition
Abstract: Thin film deposition is used to create thin films on different materials. You will learn everything about thin film deposition in this blog.
How to Test the Fluidity of Metal Powder?
Date: 2021-09-29
Keywords: How,Test,the,Fluidity,Metal,Powder,Fluidity,important,
Abstract: How to Test the Fluidity of Metal Powder? Today, we would like to share with you the most commonly used test method of powder fluidity hall flow rate method.
What is the Cause of Coating Shrinkage? How to Solve It?
Date: 2021-09-29
Keywords: What,the,Cause,Coating,Shrinkage,How,Solve,Various,problems,
Abstract: Various problems may occur during electrostatic powder spraying. When we encounter the coating shrinkage cavity, how should we deal with it?
Advantages and Disadvantages of Magnetron Sputtering Technology
Date: 2022-09-29
Keywords: Advantages,and,Disadvantages,Magnetron,Sputtering,The,
Abstract: The magnetron sputtering has greatly impacted the position of other coating methods. So what are the advantages and disadvantages of magnetron sputtering?