Niobium Sputtering Target Video
Date: 2020-06-30
Keywords: Niobium,Sputtering,Target,Video,Niobium,Sputtering,Target,
Abstract: Niobium Sputtering Target.Brand: AEM Deposition.Purity: 99.95%.Size: 750 x 63.5 x 12 mm.Tolerance: ± 0.2 mm
Niobium Sputtering Target Video
Date: 2020-06-30
Keywords: Niobium,Sputtering,Target,Video,Niobium,Sputtering,Target,
Abstract: Niobium Sputtering Target.Brand: AEM Deposition.Purity: 99.95%.Size: 750 x 63.5 x 12 mm.Tolerance: ± 0.2 mm
Chromium Sputtering Target Video
Date: 2020-06-30
Keywords: Chromium,Sputtering,Target,Video,Chromium,Sputtering,Target,
Abstract: Chromium Sputtering Target.Brand: AEM Deposition.Purity: 99.95%.Size: 750 x 63.5 x 12 mm.Tolerance: ± 0.2 mm.
Aluminum Sputtering Target Video
Date: 2020-06-30
Keywords: Aluminum,Sputtering,Target,Video,Aluminum,Sputtering,Target,
Abstract: Aluminum Sputtering Target.Brand: AEM Deposition.Purity: 99.99%.Size: 750 x 63.5 x 12 mm.Tolerance: ± 0.2mm
Titanium Sputtering Target Plate Video
Date: 2020-06-30
Keywords: Titanium,Sputtering,Target,Plate,Video,Titanium,Sputtering,
Abstract: Titanium Sputtering Target.Brand: AEM Deposition.Purity: 99.99%.Size: 750 x 63.5 x 12 mm.Tolerance: ± 0.2mm
List of Sputtering Targets for Shield Coating
Date: 2020-06-24
Keywords: List,Sputtering,Targets,for,Shield,Coating,Vacuum,
Abstract: Vacuum sputtering EMI has the characteristics of high conductivity and high electromagnetic shielding efficiency. It can be widely used in the EMI shielding of communication products (mobile phones), computers (laptops), portable electronic products, consumer electronics, network hardware (servers, etc.), medical instruments, home electronic products, aerospace and national defense electronic equipment. At the same time, it is suitable for metal shielding of various plastic products (PC, PC + ABS, ABS, etc.).
List of Sputtering Targets for Low Radiation Building Glass
Date: 2020-06-24
Keywords: List,Sputtering,Targets,for,Low,Radiation,Building,Glass,
Abstract: There are many sputtering targets that can be used for architectural glass coating, such as Ag, Ni / Cr, Sn (SnO2 film), Ti / TiO2 (TiO2 film), Zn (ZnO film), Si / SiAl (SiN film), ZnAl, ZnSn, ZnSnSb, Cr, Nb, Nb2O5 and other sputtering targets, as follows:
List of Sputtering Targets for Thermally Reflective Automobile Glass
Date: 2020-06-24
Keywords: List,Sputtering,Targets,for,Thermally,Reflective,Coated,
Abstract: The heat reflection coated glass can effectively reflect the infrared light of the sun (20-25%), block the heat from entering the vehicle (heat insulation performance > 30%), reduce the air conditioning load, maintain good light transmittance (70-75%), and maintain a clear vision. Therefore, the demand of sputtering target materials for thermal reflective coated glass is becoming increasingly strong.
List of Sputtering Targets for Tool Coating
Date: 2020-06-24
Keywords: List,Sputtering,Targets,for,Tool,Coating,Tool,coating,often,
Abstract: Tool coating is often used for turning tools, manipulators, molds and other mechanical and metallurgical purposes. Coating products include drill, milling cutter, gear cutter, tap, scissors, cutter, plug, die, etc. The thickness of the film is generally 2-10 μ M. the film requires high hardness, low wear, impact resistance, high adhesion, etc. its technical level is higher than that of decorative coating. The superhard protective layer of tools and dies, including tin, ZrN, TiAlN, tic, TiCN, CrN, DLC and other Sputtering Coatings.
Influence of Target Binding and Liner Pipe Quality on Large Area Coating
Date: 2020-06-23
Keywords: Influence,Target,Binding,and,Liner,Pipe,Quality,Large,Area,
Abstract: Target shape, purity, density, porosity, grain size and binding quality all have a great influence on film quality and sputtering rate. Today, I want to talk about the influence of target binding and liner tube quality on large area coating.
Influence of Sputtering Target Purity and Uniformity on Large Area Coating
Date: 2020-06-23
Keywords: Influence,Sputtering,Target,Purity,and,Uniformity,Large,The,
Abstract: The shape, purity, density, porosity, grain size and binding quality of the target have great influence on the coating quality and sputtering rate. High quality target material can not only ensure the good film quality, but also extend the life cycle of Low-E products. More importantly, it can reduce production costs and improve production efficiency. Today, I will discuss with you the influence of target purity and material uniformity on large area coating.
Effect of Crystal Size and Direction of Sputtering Target on Large Area Coating
Date: 2020-06-23
Keywords: Effect,Crystal,Size,and,Direction,Sputtering,Target,Large,
Abstract: Target shape, purity, density, porosity, grain size and binding quality all have a great influence on the quality and sputtering rate of large area coating. Today, I will discuss the influence of the crystal size and crystal direction of sputtering target on large area coating.