86-0731-89578196 [email protected]

Molybdenum Disulfide Sputtering Targets (MoS2)

Molybdenum Disulfide Sputtering Targets (MoS2)
Material Type Molybdenum Sulfide
Symbol MoS2
Color/Appearance Black, Crystalline Solid
Melting Point (°C) 1,185
Z Ratio **1.00
Sputter RF
Max Power Density*
(Watts/Square Inch)
Type of Bond Indium, Elastomer


Molybdenum disulfide is an inorganic compound composed of molybdenum and sulfur. Its chemical formula is MoS2.The compound is classified as a metal dichalcogenide. It is a silvery black solid that occurs as the mineral molybdenite, the principal ore for molybdenum. MoS2 is relatively unreactive. It is unaffected by dilute acids and oxygen. In appearance and feel, molybdenum disulfide is similar to graphite. It is widely used as a solid lubricant because of its low friction and robustness. Bulk MoS2 is a diamagnetic, indirect bandgap semiconductor similar to silicon, with a bandgap of 1.23 eV. 

Material Notes

Molybdenum Disulfide Sputtering Target, Purity is 99.99%; Circular: Diameter <= 14inch, Thickness >= 1mm; Block: Length <= 1.4m (produced by serveral pieces construction), Width <= 12inch, Thickness >= 1mm. 


Other Information of Molybdenum Disulfide Sputtering Targets

Electronics, flexible displays, and transitors
• Semiconductor

• Optical

• High purity
• Custom Sizes Available

Manufacturing Process
• Manufacturing - Hot pressed - Sintered, Elastomer bonded to backing plate

• Cleaning and final packaging, Cleaned for use in vacuum,
Protection from environmental contaminants
Protection during shipment

• 99.9% Minimum Purity

• Discs, Plates, Column Targets, Step Targets, Custom-made Avaliable

• Indium bonding service

Click for a downloadable datasheet on the Molybdenum Disulfide Sputtering Targets (MoS2)
Can't find the downloadable datasheet you need? Click here to send email to get it.
Click here for answers to some of the most common questions we get asked.