86-0731-89578196 [email protected]
AEM Deposition

Molybdenum Selenide Sputtering Targets (MoSe2)

Molybdenum Selenide Sputtering Targets (MoSe2)
Molybdenum Selenide Sputtering Targets (MoSe2)Molybdenum Selenide Sputtering Targets (MoSe2)Molybdenum Selenide Sputtering Targets (MoSe2)
Material Type Molybdenum Selenide
Symbol MoSe2
Color/Appearance Dark Grey, Solid
Melting Point (°C) 1,200
Theoretical Density (g/cc) 6.00
Water Solubility Insoluble
Sputter RF, RF-R, DC
Type of Bond Indium, Elastomer


Managanese Selenide (MoSe) is an inorganic compound of molybdenum and selenium. Its structure is similar to that of MoSThese compounds are made up of a transition metals and elements of group 16 on the periodic table of the elements. Compared to MoS, MoSe exhibits higher electrical conductivity. Molybdenum Selenide (MoSe2) is commonly used in electronic industries and produced by hot press technique.

Material Notes

Manganese Selenide Sputtering Target, Purity is 99.9%; Circular: Diameter <= 14inch, Thickness >= 1mm; Block: Length <= 1.4m (by several pieces construction), Width <= 12inch, Thickness >= 1mm.

Other Information of Molybdenum Selenide Sputtering Targets

  PVD and CVD display
• Semiconductor

• Optical

• High purity
• Custom Sizes Available

Manufacturing Process
• Manufacturing - Hot pressed - Sintered, Elastomer bonded to backing plate

• Cleaning and final packaging, Cleaned for use in vacuum,
Protection from environmental contaminants
Protection during shipment

• 99.9%  Minimum Purity

• Disk Targets, Rectangle Targets, Column Targets, Step Targets, Custom-made shape available

• Indium bonding service (optional)

Click for a downloadable datasheet on the Molybdenum Selenide Sputtering Targets (MoSe2)
Can't find the downloadable datasheet you need? Click here to send email to get it.
Click here for answers to some of the most common questions we get asked.