86-0731-89578196 [email protected]

Lanthanum Gallate Sputtering Targets (LaGaO3)

Lanthanum Gallate Sputtering Targets (LaGaO3)
Material Type Lanthanum Gallate
Symbol LaGaO3
Color/Appearance Various colors, Solid
Melting Point (°C) N/A
Relative Density (g/cc) >90%
Z Ratio N/A
Sputter RF, RF-R, DC
Max Power Density*
(Watts/Square Inch)
N/A
Type of Bond Indium, Elastomer
Comments  

General

 

Material Notes

Lanthanum Gallate Sputtering Targets, Purity is 99.9%; Circular: Diameter <= 14inch, Thickness >= 1mm; Block: Length <= 32inch, Width <= 12inch, Thickness >= 1mm. Bonding is recommended for these materials. Many materials have characteristics which are not amenable to sputtering, such as, brittleness and low thermal conductivity.This material may require special ramp up and ramp down procedures. This process may not be necessary with other materials. Targets that have a low thermal conductivity are susceptible to thermal shock.

Click for a downloadable datasheet on the Lanthanum Gallate Sputtering Targets (LaGaO3)
Can't find the downloadable datasheet you need? Click here to send email to get it.
Click here for answers to some of the most common questions we get asked.