86-0731-89578196 [email protected]

Zinc Oxide doped with Scandia Sputtering Targets (ZnO/Sc2O3 98/02 wt%)

Zinc Oxide doped with Scandia Sputtering Targets (ZnO/Sc2O3 98/02 wt%)
Material Type Zinc Oxide doped with Scandia
Symbol ZnO / Sc2O3, 98 / 2 wt%
Color/Appearance Various colors, Solid
Melting Point (°C) N/A
Relative Density (g/cc) >95%
Water Solubility Insoluble
Sputter RF, RF-R, DC
Type of Bond Indium, Elastomer
Comments Various composition available


ZnO is promising for a number of applications in light emission, sensors, and transparent conducting electronics, but its surface is susceptible to instabilities caused by atmospheric exposure. the band offsets of sputtered Sc2O3 on both Zn- and O-terminated ZnO using x-ray photoelectron spectroscopy and obtained the bandgaps of the materials using reflection electron energy loss spectroscopy. 

Material Notes

Zinc Oxide doped with Scandia Sputtering Target, Purity is 99.9%; Circular: Diameter <= 14inch, Thickness >= 1mm; Block: Length <= 32inch, Width <= 12inch, Thickness >= 1mm.


Other Information of Zinc Oxide doped with Scandia Sputtering Targets

• Gate Dielectric

• For CMOS

• High purity
• Custom Sizes Available

Manufacturing Process
• Manufacturing - Cold pressed - Sintered, Elastomer bonded to backing plate

• Cleaning and final packaging, Cleaned for use in vacuum,
Protection from environmental contaminants
Protection during shipment

• 99.9% ex Strontium Minimum Purity

• Up to 12'' Diameter Targets Available

• Planar Tiles Up to 8'' X 5'' for Larger Target Configurations

Can't find the downloadable datasheet you need? Click here to send email to get it.
Click here for answers to some of the most common questions we get asked.