86-0731-89578196 [email protected]

Zinc Oxide doped with Sodium Sputtering Targets (Zn0.99Na0.01O)

Zinc Oxide doped with Sodium Sputtering Targets (Zn0.99Na0.01O)
Material Type Zinc Oxide doped with Sodium
Symbol Zn0.99Na0.01O
Color/Appearance Various colors, Solid
Melting Point (°C) N/A
Relative Density (g/cc) >95%
Water Solubility Insoluble
Sputter RF, RF-R, DC
Type of Bond Indium, Elastomer
Comments Various composition available


Na-doped ZnO photocatalysts (Na-ZnO) was synthesized by simple wet chemical method using zinc acetate dehydrate as starting material and samples was annealed at 350 C. The results of characterization techniques like XRD, SEM, EDXA and UV reveals that the prepared samples were nanometer in size and Na ions successfully doped into the ZnO lattice without change its wurtzite structure. The effect of addition of different concentration of sodium dopant on structural property, optical property, surface morphology and photo-catalytic activity of ZnO nanocrystals were analyzed.

Material Notes

Zinc Oxide doped with Sodium Sputtering Target, Purity is 99.9%; Circular: Diameter <= 14inch, Thickness >= 1mm; Block: Length <= 32inch, Width <= 12inch, Thickness >= 1mm.


Other Information of Zinc Oxide doped with Sodium Sputtering Targets

• Gate Dielectric

• For CMOS

• High purity
• Custom Sizes Available

Manufacturing Process
• Manufacturing - Cold pressed - Sintered, Elastomer bonded to backing plate

• Cleaning and final packaging, Cleaned for use in vacuum,
Protection from environmental contaminants
Protection during shipment

• 99.9% ex Strontium Minimum Purity

• Up to 12'' Diameter Targets Available

• Planar Tiles Up to 8'' X 5'' for Larger Target Configurations

Click for a downloadable datasheet on the Zinc Oxide doped with Sodium Sputtering Targets (Zn0.99Na0.01O)
Can't find the downloadable datasheet you need? Click here to send email to get it.
Click here for answers to some of the most common questions we get asked.