86-0731-89578196 [email protected]

Yttrium Ferrite Sputtering Targets (Y3Fe5O12)

Yttrium Ferrite Sputtering Targets (Y3Fe5O12)
Material Type Yttrium Ferrite
Symbol Y3Fe5O12, YIG
Color/Appearance Various colors, Solid
Melting Point (°C) N/A
Theoretical Density (g/cc) N/A
Water Solubility Insoluble
Sputter RF, RF-R, DC
Type of Bond Indium, Elastomer
Comments  

General

Yttrium Ferrite is generally immediately available in most volumes. High purity, submicorn and nanopowder forms may be considered. AEM produces to many standard grades according applicable.

Material Notes

Yttrium Ferrite Sputtering Target, Purity is 99.99%; Circular: Diameter <= 14inch, Thickness >= 1mm; Block: Length <= 32inch, Width <= 12inch, Thickness >= 1mm. Bonding is recommended for these materials. Many materials have characteristics which are not amenable to sputtering, such as, brittleness and low thermal conductivity.This material may require special ramp up and ramp down procedures. This process may not be necessary with other materials. Targets that have a low thermal conductivity are susceptible to thermal shock.
 



Other Information of Yttrium Ferrite Sputtering Targets

Applications
  Ferroelectric
• Gate Dielectric

• For CMOS

Features
• High purity
• Custom Sizes Available

Manufacturing Process
• Manufacturing - Cold pressed - Sintered, Elastomer bonded to backing plate

• Cleaning and final packaging, Cleaned for use in vacuum,
Protection from environmental contaminants
Protection during shipment

Options
• 99.9% ex Strontium Minimum Purity

• Up to 12'' Diameter Targets Available

• Planar Tiles Up to 8'' X 5'' for Larger Target Configurations

 
 
Click for a downloadable datasheet on the Yttrium Ferrite Sputtering Targets (Y3Fe5O12)
Can't find the downloadable datasheet you need? Click here to send email to get it.
Click here for answers to some of the most common questions we get asked.